After you have created your Bolt Merchant Account, you’ll be directed to the Payment Processor selection page. On this page:

1. Select your payment processor from the provided list. If you do not see your processor, reach out to our Support Team.
2. Fill out the requested information. Click on your processor from the list below for instructions on how to create and enter your connection credentials.



Adyen

Click to expand.

To connect Adyen, retrieve these credentials from your existing Adyen account.



Credential	Description	Example	Where to Find It
Adyen Merchant Account Code	A unique identifier for your Adyen account.	129413	From your Adyen account: Go to Settings. Find Merchant accounts. Find your account code, then copy the string for use in a later step.
Adyen Webservice API Key	A string created specifically for use with Bolt that allows connection between the Bolt and Adyen APIs.	324f...3ni9	From your Adyen account: Go to Developers, then API credentials, and select the web service credential that has a description of Bolt. If you don’t already have an API credential for Bolt, you should create a Web Service User credential and add Bolt in the description. When you click the credential, you’ll see the Configure API Credential Page. Go to the Authentication section, under Server Settings, and select Generate New API Key. Select Save changes at the bottom of the page, then copy the string for use in a later step.
Adyen HMAC Key	The hash-based message authentication code (HMAC) is a unique secret key that generated in your Adyen account.	44782DEF547...6BA056	You can generate and retrieve an HMAC signature by following the instructions listed in Adyen’s Verify HMAC Signatures article.
Adyen Username	The username for the Adyen API credential you use for reporting.	Report@Company.BoltFinancial	From your Adyen account: Go to Developers, then API credentials, and select the reporting credential. If you don’t already have one, you should create a Reporting credential. When you click the credential, you’ll see General Settings. Copy the value in Username for use in a later step.
Adyen Password	The password for the Adyen API credential you use for reporting.	56f3...99h6	From your Adyen account: Go to Developers, then API credentials, and select the reporting credential. If you don’t already have one, you should create a Reporting credential. When you click the credential, you’ll see General Settings. Go to the Authentication section and click Basic Auth. Click Generate password. Click Save changes at the bottom of the page, then copy the password for use in a later step.
Live URL Prefix	A unique snippet of an endpoint URL that allows Bolt to identify your Adyen account. Note: This value is only available in your live environment.	Example endpoint: https://e73e0f17d7bd00d7-BoltFinancial-checkout-live.adyenpayments.com/checkout/v1/payments Example Live URL Prefix: e73e0f17d7bd00d7-BoltFinancial	From your Adyen account: Go to Developers. Go to API URLs and copy the Live URL prefix from one of the endpoints.

Authorize.net

Click to expand.

To connect Authorize.net, enter the following information from your existing account:



Credential	Description	Example	Where to Find It
Authorize.net API Login ID	A complex value that identifies your account to the payment gateway when submitting transaction requests from the website.	Ab&1R7ghT	Log into the Merchant Interface. Navigate to Account > Settings > API Credentials & Keys. Find your API Login ID and paste it into the required Bolt Set Up field.
Authorize.net Transaction Key	A randomly generated value that adds an additional layer of authentication when submitting transaction requests from your website.	Ao73tGh6ryB358nI	Log into the Merchant Interface. Navigate to Account > Settings > API Credentials & Keys. Click New Transaction Key. Select the option that allows both keys to remain in use for up to 24 hours. After you’ve generated a new key, you have 24 hours to update your keys across all integrations. Obtain the PIN from your email and enter it on the verification page. Copy the Transaction Key and paste it into the required Bolt Set Up field.





If you are using Authorize.net as an emulator for another payment processing tool and receive an authorization error for the credentials you use, please open a ticket with our Support Team.

Braintree

Click to expand.

To connect Braintree, enter the following information from your existing account:



Credential	Description	Example	Where to Find It
Braintree Merchant ID	A 16-character string that is the unique identifier for your entire Braintree gateway account.	7289hdsj2479herj	In your Braintree admin dashboard: Go to the Settings gear icon in the top-right corner, then select Business from the drop down. Find your Merchant ID, then copy and paste the string into the required Bolt Set Up field.
Braintree Public Key	A 16-character user-specific string that acts as a public identifier.	32y47e4h8fej38fj	In your Braintree admin dashboard: Go to the Settings gear icon in the top-right corner, then select API from the drop down. Select Keys. Find your Public ID under API Keys, then copy and paste the string into the required Bolt Set Up field.
Braintree Private Key	A 32-character user-specific string that acts as a private identifier to operate API calls.	83jd74bs03nf73bskf83hf8j8hskd3ff	In the same location in your Braintree account that you found your Public Key, find the Private Key column. Click View. Copy and paste it into the required Bolt Set Up field.





CyberSource

Click to expand.

To connect CyberSource, enter the following information from your existing account:



Credential	Description	Example	Where to Find It
CyberSource Merchant ID	The unique identifier for your merchant account with CyberSource. Usually the same as your CyberSource User Name.	api_integration_tests	Find your initial CyberSource confirmation of registration email. The Merchant ID is listed here.
CyberSource Shared Secret Key	Base-64 encoded secret key used as the authentication ID for REST API requests.	0524a22e-e46a-4872- 59a79a264f03	Important: This page shows both the shared secret key and the shared secret. Make sure to save both values before you navigate away from this page. The shared secret is not retrievable in the future. Log into the Business Center and navigate to Payment Configuration > Key Management. Click Generate Key. Click Rest - Shared Secret > Generate Key. Copy and paste the key into the required Bolt Set Up Field. Optionally, click Download to save the keys information in a text file on your machine.
CyberSource Shared Secret	Base-64 encoded secret used as an authentication signature for REST API requests.	vz2Ir2ivCuOEd43YThb47 QhcfP7bqgjYSycu49lAwYW=



You can find more information about these keys in CyberSource's documentation.

NMI

Click to expand.

To connect NMI, you must first generate Bolt-specific NMI API and Webhook Signing keys.

Then, enter the following credentials from your existing account into the Bolt Set Up fields:


Credential	Description	Example	Where to Find It
NMI API Key	A 32-character api key, generated by you, specifically for use in this set up process.	jlsdfLS3FDd3skfas2hdfZ4ds3274k8f	Generate in your NMI account: Go to My Settings > Security Keys > Add a New Private Key. Click generate a new API key. Copy and paste the key into the required Bolt Set Up Field.
Webhook Signing Key	A webhook URL that combines the base Bolt webhook with your Bolt Merchant Public ID. This allows Bolt to coordinate chargeback handling with your payment processor.	https://api.bolt.com/v1/webhooks/nmi/{public-id}	Replace {public-id} with your “Merchant Public ID” (a 12-character string), found in the Developers tab in your Bolt Merchant Dashboard. If you find that you cannot access this key, please reach out to our Support team.





Stripe

Click to expand.

To connect Stripe:



1. Click Connect Stripe.
2. Then, log into and verify your account credentials for your existing Stripe Account.
3. Click Log In.



Do not click "Create New Account" - this may create an additional Stripe account and freeze transactions for 14 business days.


3. Click Connect [Processor Name], where the [Processor Name] is your processor.
4. After your payment processor is connected, click Complete setup.